WOW-1001 Halftone Base is designed as both a stand-alone clear ink and as a mixing base created specifically for wet-on-wet printing. WOW-1001 Halftone Base, when pigmented or mixed with other plastisol inks, will produce an exceptionally clean ink that will print wet-on-wet forever, making this an ideal ink for high volume print jobs.

More Info

LFP-1002 Halftone Base is an economically priced clear extender that has exceptional adhesive properties. Use to either extend out your inks or add your favorite glitters and shimmers to create your own custom effects. The LFP-1002 Halftone Base cures out exceptionally clear and has very smooth printing characteristics.

More Info

WOW-1015 Softee Base is a super soft, buildup free mixing base designed specifically for wet-on-wet printing where a soft print finish is desired. Softee Base, when pigmented or mixed with other plastisol inks, will produce an extremely soft print. Ideal for high volume print jobs, it will not buildup on succeeding screens, allowing for longer press runs with fewer interruptions. WOW-1015 Softee Base dramatically improves the wet-on-wet printability of ink systems that will not print wet-on-wet.

More Info

P-5011 Curable Reducer is a 100% solids plastisol reducer that can be added to any plastisol product to reduce the viscosity of the ink. P-5011 curable reducer is fully curable by itself.

More Info

RD-55 is a low viscosity plasticizer designed to soften your final print. It is normally used at up to 5% without losing opacity; it can be used at up to 10%. The more you use, the softer the ink will become.

More Info

MF-66 Nylon Bonding Agent is an additive to plastisol inks for printing on shell or treated Nylon substrates. These substrates generally appear in the form of waterproofed jackets. Since each jacket manufacturer determines the type and amount of waterproofing chemical they apply to their garments, it is recommended that each batch of garments be tested prior to production.

More Info

DP-100 is a low viscosity proprietary product designed to relax, thick/stiff/tacky ink and make it printable again. It is recommended to be used at 0.5%-3% by weight. Most ink will see optimal print properties restored with no more than an 1% add of DP-100. Although with some older and thicker inks, you may need to add up to 5%. Please refrain from adding more than 5% DP-100 to your ink. If you must do so, please mix a sample batch in a smaller container first and perform a test print for printability and cure of ink.

More Info