The data sheets are in Adobe Acrobat Reader. To view these documents you will need to download Adobe Acrobat Reader if you already haven't.
Product Overview:
DIS-ACT Activator is an oxidizing agent for use in our DIS-SWBS and DIS-BSE. It is what “strips or removes” the color dyes from the garment.
Printing:
N/A
Stencil:
Directions on use:
Use DIS-ACT Activator by adding 6% by weight to the ink to be activated. Do not activate more ink than you will use in an 8 hour period. If you are mixing enough ink for several days' production, only activate what is needed for that shifts production.
When adding pigments into the ink, add your colors and any additives first, then tally your total weight. Calculate the percentage of WB-ACT you need and add that last. Use some form of strong stirring/homogenization (a small hand held drill works well) to ensure the WB-ACT is fully dissolved. Hand stirring is NOT recommended.
Curing is extremely important in assuring the evaporation of the WB-ACT. If recommended cure time or temperature is not achieved, washing may be recommended to remove any activator. Always use proper safety gear when handling WB-ACT which includes goggles and gloves.
Flashing:
N/A
Curing:
N/A
Cleanup:
Use any of the commercially available products for the cleanup of water base inks. Warm water and soap works as well.
Rutland Plastic Technologies, Inc. 10021 Rodney Street Pineville, NC
28134
