The data sheets are in Adobe Acrobat Reader. To view these documents you will need to download Adobe Acrobat Reader if you already haven't.
Product Overview:
EHP-2001 Galactic Glow is a white puff ink that glows in the dark. Add an extra dimension to all night time designs by printing the stars and other night time objects with EHP-2001 Galactic Glow.
Printing:
Puff inks are generally printed through coarse meshes, 60-80 TPI (23-31 TPcm) and as high as 110-160 TPI (43-62 TPcm). Screens stretched to a minimum of 25 newtons are recommended. This allows you to lay the ink on the surface of the shirt using minimal squeegee pressure and minimal off contact.
Stencil:
Use any water resistant direct emulsion or capillary film.
Substrates:
EHP-2001 may be printed on 100% cotton, cotton/poly blends, acrylics and polyesters. Pre-production run testing is always recommended to ensure adhesion, washability and dye migration, amongst other things.
Curing:
Recommended cure temperature is 320-340°F (160-171°C) for 60-90 seconds, depending on curing unit and thickness of ink deposit. Lower temperatures may not produce adequate puffing and higher temperatures or excessive duration in the dryer may cause ink to over-puss and collapse.
Cleanup:
Use any of the commercially available products for the cleanup of plastisol inks.
Environmentally Friendly:
QCM Plastisol Ink contains no leaded pigments and, when properly disposed of, has no environmental impact. Use a screen wash for plastisols for cleanup. Scrape screens carefully and store ink for reuse. Minimize unusable scrap ink by segregating ink by color.
Rutland Plastic Technologies, Inc. 10021 Rodney Street Pineville, NC
28134
