WB-BNDR Binder is an additive meant to be used when adding extra pigment to an existing formula. Binder is used to promote adhesion of the pigment to the garment/fabric. Proper use of WB-BNDR will impart excellent color and crock fastness.

More Info

WB-FIX Fixer is a crosslinking additive used to improve fastness of the ink to the garment and accelerate its curing properties. WBFIX will post cure for up to 72 hours, which allows for the air drying of water base inks.

More Info

WB-Lub Lubricant is an additive that promotes the retention of water in a water base ink system. WB-LUB is also known as a humectant. When added to your water base ink, the ink will stay “wetter” for a longer period of time. This will allow you to print for longer periods of time before needing to “re-wet” or mist water on your screens.

More Info

WB-SFT Softener is designed to increase the soft hand feel of finished water base prints. This is especially desirable when doing fashion prints and printing on super light weight fabrics.

More Info

WB-PEN Penetrant is an additive that promotes ink flow in water base inks. WB-PEN allows the water base ink to penetrate deeper into the fabric you are printing on. While the printer will use WB-PEN primarily on thicker fabrics, it can be used on all fabric types to promote a much softer feel. When added at the proper ratio, your finished ink will have improved printability, reduced grinning/wicking (ink spread) and improved ink penetration on difficult substrates like terry cloth (bath robes), towels, and other thick fabrics.

More Info

RFU-EXT Ready For Use Extender Clear is a soft hand water base clear designed to be used as a base for pigments (WBX color matching) or to add to existing RFU inks as necessary. RFU-EXT is ideal for use on light colored garments including cottons, 50/50 blends, terry cloth or polyester and lycra when modified for those fabric types. Do not leave RFU-EXT sitting in your screen for long periods of time as it can dry out.

More Info