Water Base Penetrant - WB-PENWB Additives and Modifiers |
|
The data sheets are in Adobe Acrobat Reader. To view these documents you will need to download Adobe Acrobat Reader if you already haven't. |
Product Overview:
WB-PEN Penetrant is an additive that promotes ink flow in water base inks. WB-PEN allows the water base ink to penetrate
deeper into the fabric you are printing on. While the printer will use WB-PEN primarily on thicker fabrics, it can be used on all
fabric types to promote a much softer feel. When added at the proper ratio, your finished ink will have improved printability,
reduced grinning/wicking (ink spread) and improved ink penetration on difficult substrates like terry cloth (bath robes), towels,
and other thick fabrics.
Printing:
N/A
Stencil:
N/A
Directions on use:
Use WB-PEN Penetrant at 1-3% by weight into your finished ink. Do not add more than 3%. Please test finished ink for cure
before going into production.
Flashing:
N/A
Curing:
N/A
Cleanup:
Use any of the commercially available products for the cleanup of water base inks. Warm water and soap works as well.
Environmentally Friendly:
QCM water base inks contain no leaded pigments and, when properly disposed of, has no environmental impact. Use water
emulsifying screen cleaners for cleanup. Scrape screens carefully and store ink for reuse. |
|
