XOLB-155 OPTIMUM WHITE

XOLB-155 Optimum White is a highly opaque White ink designed for printing on 100 % Cotton and Cotton/Poly Blends. Due to its opacity, this ink provides excellent coverage even on dark garments. The Optimum White has a creamy body that is smooth flowing and provides good fiber mat down properties. This ink can be used as stand-alone White or as an underbase depending on your needs. Optimum White is a utility white ink with good low bleed strength, and is fast shearing.

Features:

  • Print through fine meshes without adding modifiers.
  • Fast flashing provides shorter dwell times, higher throughput
  • No modifiers needed - can print through fine meshes directly.
  • Suitable for automatic or manual press

Instructions:

For best results flood the image and print using a sharp 65-90-65 durometer squeegee. Use of 86-305 mc in (34 -120 mc. cm) mesh taut screens (25 newtons or higher) are strongly recommended. Use any direct emulsion or capillary film. Parameters vary between all flash units. Flash for 2-3 seconds with the ink deposit reaching 150-250žF (65-121žC) to attain a curing temperature of 320F (160C). Ink should be dry and without tack.

Disclaimer: Not all QCM products are available in every country. Please check with your local representative for availability. The data presented are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.

Product Overview:

Brand: QCM Inks
Product Code: XOL155
Industry: Inks
Application: Screen Printing
Category: White Inks
Chemistry: Plastisol
Substrate(s): Blends
Best Used By: 12 months
Certification(s): ISO9001

Curing:

Fusion Temperature: 320°F
Gel Point: 150°F
Gel Point Time: 3 to seconds

Performance:

Coverage: High Opacity
Printability: Great
After Flash Tack: Low
Bleed Resistance: Good for Poly/Cotton Blends

Squeegee:

Profile: Square
Type: Polyurethane
Angle: 10° - 20°

Screen:

Emulsion Types: Direct

Storage:

Storage Temperature: 65°F - 95°F (18°C - 35°C)